The sixth stop of ARRC was held on September 21, 2019 at Sepang international Racing Circuit, Malaysia, and this was the penultimate stop of ARRC. 


For earning more points, all teams will definitely fight hard. HONDA CBR250RR, YAMAHA YZF-R25 and KAWASAKI Ninja250 all participated the AP250 class, and all the motorcycles of the AP250 class used unified aRacer ECU, and nearly 95% of the motorcycles of the UB150 class also used the aRacer ECU.
 

The race was very intense that day.
 
The race at Sepang international Racing Circuit, Malaysia, was the penultimate stop of ARRC.
 
aRacer ECU has already become the dedicated brand of ECU for the unified specification competitions all over the world. In Asia, including YAMAHA Taiwan, Malaysia, Thailand, Indonesia, Vietnam, HONDA Indonesia, Philippines, India and other unified specification competitions all uniquely specifies to use aRacer ECU. This also makes aRacer become the third ECU manufacturer that provides uniform specification ECU for competitions, the strength of aRacer from Taiwan cannot be underestimated.

aRacer team set the computer for the rider from Taiwan.
 
This time, the Taiwanese rider William Chiang joined the wild card team to test the water of the competition. However, because the motorcycle that he used was a racing motorcycle from last year and its performance was quite different from the current model, his grade was not good enough to get into the intermediate level. We hope the racer from Taiwan can get good results at one fell swoop next year.
 

The Taiwanese rider William Chiang joined the wild card team to test the water of the competition.
 

The motorcycle that he used was a racing motorcycle from last year and its performance was quite different from the current model, so his grade wasn’t great.
 
AP250 race results at the Malaysia stop
 
Race1
NO.1ASTRA HONDA Racing TeamHONDA CBR250RR
NO.2A.P. HONDA Racing ThailandHONDA CBR250RR
NO.3Bike Corner SYS KYT Racing TeamHONDA CBR250RR
 
 

Irfan Ardiansyah (#16) won the champion in Race1.
 
Race2
NO.1Bike Corner SYS KYT Racing TeamHONDA CBR250RR
NO.2Manual Tech KYT KAWASAKI RacingKAWASAKI Ninja250
NO.3ONEXOX TKKR SAG Racing TeamYAMAHA YZF-R25
 

Awhin Sanjaya (#198) won the champion in Race 2.
 
After finishing the races in Malaysia, HONDA driver Irfan Ardiansyah (#16) won Race 1 and was at the fifth place in Race 2, he scored 36 points at this stop. At this moment, his total points were 176 points and that was same as the points of Andy Muhammad Fadly (#108), who was the runner-up in both Race 1 and Race 2 in Malaysia. The scores of the third place and the fourth place were also very close, so the competitions at Buriram, the last stop of ARRC, will be extremely tense. You will never know who the winner is until the last moment.
 

The next game will be extremely tense.
 
UB150 race results at the Malaysia stop
 
Race1
NO.1UMA Racing YAMAHA Maju Motor Asia TeamYAMAHA Y15 ZR
NO.2ONEXOX TKKR SAG Racing TeamYAMAHA Y15 ZR
NO.3Cardinals Racing TeamYAMAHA Y15 ZR
 

Md Akid Aziz (#13) won the champion in Race 1.
 
Race2
NO.1UMA Racing YAMAHA Maju Motor Asia TeamYAMAHA Y15 ZR
NO.2ONEXOX TKKR SAG Racing TeamYAMAHA Y15 ZR
NO.3YAMAHA Racing INDONESIAMX King 150
 

Md Haziq Md Fairues (#27) won the champion in Race 2.
 
In Race 1, Md Akid Aziz (#13) won the champion with the difference of 0.117 second, but he was at the 13th place in Race 2. Md Haziq Md Fairues (#27) won the champion in Race 2, but he was at the fourth place in Race 1. At this moment, the top three racers on the leading board were Md Akid Aziz (#13), Mckinley Kyle Paz (#123) and Md Haziq Md Fairues (#27), and Md Akid Aziz’s score was 119 points.